CVS log for src/share/man/man4/Makefile

Up to [NetBSD] / src / share / man / man4

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Pull up following revision(s) (requested by hannken in ticket #1715):
- Be robust against an invalid timer period value.
sys/dev/ic/hpetreg.h			Rev. 1.4
sys/dev/ic/hpet.c			Rev. 1.8

- Fix wrong definition of LAPIC_LEVEL_ASSERT / _MASK
sys/arch/x86/include/i82489reg.h	Rev. 1.11

- Add virtio driver - speed up disk and network access in virtual environments
sys/arch/i386/conf/GENERIC		Rev. 1.1055
sys/arch/i386/conf/ALL			Rev. 1.325
sys/arch/amd64/conf/GENERIC		Rev. 1.338
sys/dev/pci/files.pci			Rev. 1.350
sys/dev/pci/if_vioif.c			Rev. 0-1.2
sys/dev/pci/ld_virtio.c			Rev. 0-1.4
sys/dev/pci/viomb.c			Rev. 0-1.1
sys/dev/pci/virtio.c			Rev. 0-1.3
sys/dev/pci/virtioreg.h			Rev. 0-1.1
sys/dev/pci/virtiovar.h			Rev. 0-1.1
distrib/sets/lists/man/mi		Rev. 1.1352 and 1.1358
share/man/man4/Makefile			Rev. 1.573 and 1.575
share/man/man4/ld.4			Rev. 1.19
share/man/man4/virtio.4			Rev. 0-1.4
share/man/man4/vioif.4			Rev. 0-1.2
share/man/man4/viomb.4			Rev. 0-1.2

Allow NetBSD to run unmodified under Linux/kvm.

add a tpm driver from bsssd.sourceforge.net

Remove trailing whitespace.  Reported by Brad Harder.

PR/45850: Pierre Pronchery: USB multi-touch panels are not supported

Make FAST_IPSEC the default IPSEC implementation which is built
into the kernel if the "IPSEC" kernel option is given.
The old implementation is still available as KAME_IPSEC.
Do some minimal manpage adjustment -- kame_ipsec(4) is a copy
of the old ipsec(4) and the latter is now a copy of fast_ipsec(4).

install tprof related commands and man pages.

Merge flash/nand/nor infrastruct from matt-nb5-pq3.

Add vioif(4) and viomb(4).

Add documentation for gpiopwm(4).

sync with head

Document virtio(4).

Move vmt(4) to x86 subdir.
No obsolete entries added for set lists since original import was just an
hour ago.

Add vmt(4) from OpenBSD.

Install the man page for filemon(4).

Install the emdtv(4) manual page, based on earlier feedback from jmcneill@
(includes some XXX comments; should be updated alongside with the driver).
Also use the new dtviic(4) links to build a list of supported cards.

Deprecate the tuner(4) page (link to bktr(4)), as the name is too general
and nowadays misleading.

As discussed with wiz@ and jmcneill@, move the dtvi2c(4) page to dtviic(4)
(to match iic(4)) and install it by default. Also, and in particular, build
and install MLINKS for all supported demodulators and tuners.

Install the dtv(4) manual page. (The stub man-pages are commented out ATM.)

Install irmce(4) after review by jmcneill.
Sort set lists while there.

Install the ixg(4) manual page.

pwdog(4) is a device driver for QUANCOM Electronic PWDOG1 PCI
attached watchdog timers.

Backport flash/nand/nor subsystem from -HEAD.

Add urndis(4) manual page.

A driver for HP 3D DriverGuard; a LIS3LV02DL-based accelerometer. Tested on
HP NC4400. Like aps(4), this is commented out in the GENERIC kernels.

Add a small summary page for altq. From the list in PR # kern/21345.

Add a small summary page for sysmon. From the list in PR # kern/21345.

Pull up following revision(s) (requested by fair in ticket #1422):
	share/man/man4/gtp.4: revision 1.1
	distrib/sets/lists/man/mi: revision 1.1304
	share/man/man4/Makefile: revision 1.556
The mr(4) driver was replaced by gtp(4) in 2002, but the documentation
did not follow; fix PR kern/40070

Add man page for s390rtc(4).

Add a man page for rdcpcib(4). While there move rdcide.4 to i386/

Pull up following revision(s) (requested by fair in ticket #1584):
	share/man/man4/gtp.4: revision 1.1
	share/man/man4/mr.4: file removal
	distrib/sets/lists/man/mi: revision 1.1304
	distrib/sets/lists/man/mi: revision 1.1305
	share/man/man4/Makefile: revision 1.556
The mr(4) driver was replaced by gtp(4) in 2002, but the documentation
did not follow; fix PR kern/40070
I missed the .0 and .html changes for mr.4 replacement by gtp.4 in PR =
kern/40070
Now corrected.

The mr(4) driver was replaced by gtp(4) in 2002, but the documentation
did not follow; fix PR kern/40070

Sync with HEAD

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
 - Flash layer, which gives a common API to access flash devices
 - NAND controller subsystem for the flash layer
 - An example OMAP driver which is used on BeagleBoard or alike ARM boards

Move coretemp(4) to man4.x86.

add alc(4) man page

Split fujbp(4) and fujhk(4) to separate instances from fujitsu(4). Allows
modularization and takes care of tsutsui@'s justified concern over the too
generic name "fujitsu". Ok gsutre@.

Sync with HEAD

Add a skeleton driver for Asus EeePC acpiwmi(4) mappings.

Initial implementation of ibmhawk(4) driver for sensors behind the IBM Hawk
on-board Integrated Systems Management Processor found on some eServers.

Tested on an IBM eServer x335.

Don't forget to build and install MI HIL man pages.

Sync with HEAD

Add a driver for the RDC Semiconductor RDC R6040 10/100 Ethernet controller,
as found in the vortex86 SoCs (http://www.vortex86dx.com).
Ported from freebsd.
Not added to amd64's GENERIC because this CPU is 32bit only.

thanks to DM&P Electronics, Inc for providing documentation and sample
devices for this work.

introduce sandpoint satmgr(4) and altboot(8) man page entries.

Add support for the Extensible MIPS ("eMIPS") platform.  The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing.  eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman.  Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution.  The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

Add pcf8563rtc(4) manual page. Derived from rs5c372rtc(4).

add acpiwdrt(4) man page

Add man pages for Xen devices:
pciback.4 xbd.4 xbdback.4 xenbus.4 xennet.4 xpci.4 xvif.4

Blessed by bouyer@

Add a dummy-driver for ACPI fans.

Add a driver for ACPI power meters.

add auvitek(4) man page

By majority vote, move module(4) to the section 7.

Add module(4) man page by popular request.

XXX Major portions copied shamelessly from cgd's earlier lkm(4) man page,
XXX so his original copyright/license is retained.

Add ihphy

Pull up following revision(s) (requested by plunky in ticket #1407):
	sys/dev/bluetooth/btdev.h: revision 1.9
	sys/arch/iyonix/conf/GENERIC: revision 1.60
	sys/arch/sparc64/conf/GENERIC: revision 1.129
	sys/dev/usb/hid.c: revision 1.30
	sys/dev/usb/hid.h: revision 1.13
	sys/arch/i386/conf/GENERIC: revision 1.983
	usr.sbin/btdevctl/print.c: revision 1.10
	sys/arch/evbarm/conf/MPCSA_GENERIC: revision 1.16
	sys/arch/alpha/conf/GENERIC: revision 1.337
	sys/dev/bluetooth/files.bluetooth: revision 1.14
	sys/arch/evbarm/conf/GUMSTIX: revision 1.49
	sys/dev/usb/usbdevs: revision 1.550
	sys/arch/evbppc/conf/OPENBLOCKS266_OPT: revision 1.14
	sys/arch/hpcsh/conf/GENERIC: revision 1.91
	sys/dev/bluetooth/btmagic.c: revision 1.1
	distrib/sets/lists/man/mi: revision 1.1210
	sys/arch/amd64/conf/GENERIC: revision 1.279
	sys/arch/i386/conf/ALL: revision 1.258
	sys/arch/amd64/conf/XEN3_DOM0: revision 1.54
	sys/arch/hpcarm/conf/JORNADA720: revision 1.78
	sys/dev/usb/hid.c: revision 1.29
	share/man/man4/btmagic.4: revision 1.1
hid_get_data() does not work if the size of data is less than
a byte and crosses a byte boundary, and it always returns a
sign-extended value.
fix this by using the algorithm from libusbhid to read bytes,
and provide a hid_get_udata() function to return unsigned data
values.
while here, const args
update DPRINTF to reflect actual function name
add Apple Magic Mouse product-id
regen for Magic Mouse id
allow for vendor-id and product-id properties, passing them
through to child devices
add Magic Mouse driver and manpage btmagic(4)
additionally query the "PnP Information" service record to discover
any USB Forum vendor-id and product-id values and store them in the
property list if found.
add btmagic(4) where other Bluetooth drivers are listed

document shmif, or at least what's implemented so far

Add a man page for nside(4).

Exploit the fact that wizd is currently running and add a manpage
for the rump virtif.

PR/39094 - Kaspar Brand -- Add et (Agere ET1310/ET1301) network driver

The et(4) driver supports PCI Express Ethernet adapters based on
the Agere/LSI ET1310/ET1301 integrated MAC/PHY.

The et(4) driver was written by Sepherosa Ziehau for DragonFlyBSD,
ported to OpenBSD by Jonathan Gray and subsequently ported to NetBSD
by Kaspar Brand.

Sync with HEAD.

Add schide(4) man page.

Sync with HEAD.

Merge ACPI Fujitsu Driver.  Provides support for hotkeys and other
built-in components through vendor-specific ACPI devices.

ok jruoho@

add otus.

Link wmimsi(4) to acpiwmi(4).

Sync with HEAD (-D20101022).

Build the new swsensor(4) device and add to set lists

Add acpivga(4).

Add g760a fan speed controller driver.

Sync with HEAD.

Move fwhrng(4) and ichlpcib(4) to the right category.

Add acpicpu(4). Describes the basic functionality (will be adjusted as the
functionality grows). Contains a big list of caveats as a TODO.

Add fwhrng(4). Ok jakllsch@.

man page for balloon driver from Cherry

Add upgt(4), a driver for Conexant/Intersil PrismGT SoftMAC USB
IEEE 802.11b/g WLAN device, ported from OpenBSD by FUKAUMI Naoki:
http://mail-index.NetBSD.org/current-users/2010/05/28/msg013570.html
Slightly modified by me to use recently added config_mountroot(9)
to defer some device initialization until mountroot for firmload(9).

Tested on Sharp W-ZERO3 WS003SH with internal WLAN.

Note currently we cannot redistribute firmware files for upgt(4) so
they have to be downloaded and copied into /libdata/firmware/upgt manually.
See upgt(4) man page about firmware details.

add mpls(4) manpage created with great help from wiz@

Create a manpage for igphy(4).  kern/35398.

Add man page for uark(4) from OpenBSD.

add Magic Mouse driver and manpage btmagic(4)

sync to netbsd-5

file Makefile was added on branch uebayasi-xip on 2010-08-17 06:40:01 +0000

Move vald(4) to sys/dev/acpi. This is MI and should work also on amd64.

ok jmcneill@

XXX:    This is broken: it calls methods with absolute pathnames (almost
        guaranteed not to be portable across models), it accesses methods
        that are in the domain of other drivers, it walks the namespace on
        its own, it contains plenty of magic constants, it does not
        integrate with existing KPIs, etc. Summa summarum: this should be
        rewritten as a more generic toshiba_acpi(4).

Fix build failure noted by tnn@.

Add wmihp(4).

Add acpiwmi(4).

Remove aiboost(4) as obsolete and redundant since the introduction of aibs(4).

      http://mail-index.netbsd.org/tech-kern/2010/03/06/msg007458.html

Reviewed by <pgoyette>, <cegger>, <jruoho>, <tech-kern>.

Port uyurex(4) from OpenBSD.  There is some XXX but works enough to
play with it.

Add uhso(4) driver and manpage for Option N.V. Wireless WAN modems

Link acpiecdt to acpiec(4).

smcsmon.4 -> smscmon.4

remove accidentally committed et.4/etphy.4

fix build breakage -- add new smscmon.4 man page

New wbsio(4) driver for Winbond Super I/O attachment of lm(4) on any port.

    http://mail-index.netbsd.org/tech-kern/2010/02/17/msg007338.html

Reviewed by <pgoyette>, <tech-kern>.

New aibs(4) driver for ASUSTeK AI Booster (ACPI ATK0110) hardware monitor
with limit support.

        http://thread.gmane.org/gmane.os.netbsd.devel.kernel/35654

Reviewed by <pgoyette>, <jruoho> and <tech-kern>.

Add man page and cross-refs for experimental acpismbus(4)

Add uthum(4) man page

Add cas(4) manual page.

Add device-mapper manual page to build and add it to apropriate lists.

Pull up the following revisions, requested by sborrill in ticket #1114:
	share/man/man4/sdhc.4           1.1-1.2
	sys/dev/pci/sdhc_pci.c          1.1-1.3
	distrib/sets/lists/man/mi       patch
	share/man/man4/Makefile         patch
	sys/arch/amd64/conf/GENERIC     patch
	sys/arch/i386/conf/ALL          patch
	sys/arch/i386/conf/GENERIC      patch
	sys/dev/pci/files.pci           patch
	sys/dev/pci/pcidevs             patch
	sys/dev/pci/pcidevs.h           regen
	sys/dev/pci/pcidevs_data.h      regen

Add sdhc(4), a driver for SD controllers following the SD Host
Controller Standard Simplified Specification.

Pull up the following revisions(s) (requested by jmcneill in ticket #1045):
	distrib/sets/lists/man/mi:	revision 1.1160
	share/man/man4/Makefile:	revision 1.499
	share/man/man4/wb.4:		revision 1.1-1.2
	share/man/man4/ld.4:		revision 1.17
	sys/arch/i386/conf/ALL:		revision 1.215-1.216 + patch
	sys/arch/i386/conf/GENERIC:	revision 1.946-1.947 + patch
	sys/arch/amd64/conf/GENERIC:	revision 1.254-1.256 + patch
	sys/conf/files:			revision 1.958
	sys/dev/acpi/files.acpi:	revision 1.59
	sys/dev/acpi/wb_acpi.c:		revision 1.1
	sys/dev/ic/w83l518d.c:		revision 1.1
	sys/dev/ic/w83l518d_sdmmc.c:	revision 1.1
	sys/dev/ic/w83l518d_sdmmc.h:	revision 1.1
	sys/dev/ic/w83l518dreg.h:	revision 1.1
	sys/dev/ic/w83l518dvar.h.c:	revision 1.1

wb(4): Add a driver for Winbond W83L518D SD/MMC readers.

Pull up the following revisions(s) (requested by jmcneill in ticket #1044):
	distrib/sets/lists/man/mi:		patch
	share/man/man4/Makefile:		patch
	sys/arch/amd64/conf/files.amd64:	1.67
	sys/arch/i386/conf/files.i386:		1.349
	sys/conf/files				1.945
	share/man/man4/sdmmc.4:			1.1-1.4
	sys/dev/sdmmc/Makefile.sdmmcdevs	1.1
	sys/dev/sdmmc/devlist2h.awk		1.1
	sys/dev/sdmmc/files.sdmmc		1.1-1.2
	sys/dev/sdmmc/ld_sdmmc.c		1.1-1.3
	sys/dev/sdmmc/sbt.c			1.1-1.2
	sys/dev/sdmmc/sdhc.c			1.1-1.3
	sys/dev/sdmmc/sdhcreg.h			1.1
	sys/dev/sdmmc/sdhcvar.h			1.1
	sys/dev/sdmmc/sdmmc.c			1.1
	sys/dev/sdmmc/sdmmc_cis.c		1.1
	sys/dev/sdmmc/sdmmc_io.c		1.1
	sys/dev/sdmmc/sdmmc_ioreg.h		1.1
	sys/dev/sdmmc/sdmmc_mem.c		1.1-1.2
	sys/dev/sdmmc/sdmmcchip.h		1.1
	sys/dev/sdmmc/sdmmcdevs			1.1
	sys/dev/sdmmc/sdmmcdevs.h		1.1-1.2
	sys/dev/sdmmc/sdmmcreg.h		1.1-1.3
	sys/dev/sdmmc/sdmmcvar.h		1.1

Add sdmmc framework

add wb(4) man page.

Pull up following revision(s) (requested by jmcneill in ticket #946):
	distrib/sets/lists/man/mi: revision 1.1155
	doc/CHANGES: revision 1.1285
	etc/MAKEDEV.tmpl: revision 1.128
	share/man/man4/Makefile: revision 1.498 via patch
	share/man/man4/hdaudio.4: revision 1.1-1.3
	share/man/man8/MAKEDEV.8: revision 1.36
	sys/arch/amd64/conf/GENERIC: revision 1.250-1.251
	sys/arch/amd64/conf/XEN3_DOM0: revision 1.44-1.45
	sys/arch/i386/conf/ALL: revision 1.206-1.207
	sys/arch/i386/conf/GENERIC: revision 1.942-1.943
	sys/arch/i386/conf/XEN3_DOM0: patch
	sys/conf/majors: revision 1.47 via patch
	sys/dev/pci/hdaudio/files.hdaudio: revision 1.1-1.2
	sys/dev/pci/hdaudio/hdaudio.c: revision 1.1-1.4
	sys/dev/pci/hdaudio/hdaudio_afg.c: revisions 1.1-1.14
	sys/dev/pci/hdaudio/hdaudio_mixer.h: revisions 1.1-1.3
	sys/dev/pci/hdaudio/hdaudio_pci.c: revisions 1.1-1.2
	sys/dev/pci/hdaudio/hdaudioio.h: revisions 1.1-1.2
	sys/dev/pci/hdaudio/hdaudioreg.h: revisions 1.1-1.3
	sys/dev/pci/hdaudio/hdaudiovar.h: revisions 1.1-1.4
	sys/dev/pci/files.pci: revisions 1.319 and 1.322 via patch
hdaudio(4) is a standards-compliant driver for High Definition Audio.
It will replace azalia(4) after testing.
To use, comment out azalia in your kernel configuration and uncomment the
hdaudio and hdafg lines so it reads:
hdaudio*        at pci? dev ? function ?
hdafg*          at hdaudiobus?
You should also:
cd /dev
sh MAKEDEV audio

hdaudio(4) is a standards-compliant driver for Intel High Definition Audio.
It will replace azalia(4) after testing.

To use, comment out azalia in your kernel configuration and uncomment the
hdaudio and hdafg lines so it reads:

# Intel High Definition Audio
hdaudio*	at pci? dev ? function ?
hdafg*		at hdaudiobus?

You should also:
cd /dev
sh MAKEDEV audio

Add support for multi-position electro-mechanical keylocks.  An example
driver, gpiolock(4), is provided as an example how to interface real hardware.
A new securemodel, securemodel_keylock, is provided to show how this can
be used to tie keylocks to overall system security.  This is experimental
code.  The diff has been on tech-kern for several weeks.

Reviewed by many, kauth(9) integration reviewed by Elad Efrat; approved by
tonnerre@ and tron@.  Thanks to everyone who provided feedback.

Add the manual page for the gpioiic(4) driver.

Support SMSC LAN9118 Family Ethernet interfaces device driver.
  It tested on GUMSTIX only.

Add a manual page for the gpiosim(4) pseudo-device.

Support Marvell Hercules-I/II SATA Controllers.

Add iic(4) manpage, partly taken from OpenBSD.

Pull up following revision(s) (requested by jnemeth in ticket #2017):
	share/man/man4/Makefile: revision 1.430
note new xirc manpage

Sync with HEAD.

Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html

Initial implementation of sdtemp(4) driver for on-DIMM temp sensor.

(These optional sensors are specified by JEDEC Standard No. 21-C
Section 4-7 and implemented by multiple vendors.  Tested on my
amd64 machine with Kingston KVR1066D3E7S/2G memory which includes
a STMicro STTS424E02 sensor.)

Revert revision 1.488 (addition of altmem), which was part of ticket
735.  Bad cegger!

Pull up following revision(s) (requested by cegger in ticket #735):
	sys/dev/pci/if_age.c: revisions 1.1-1.28
	sys/dev/pci/if_agereg.h: revisions 1.1-1.2
	sys/dev/pci/if_ale.c: revisions 1.1-1.3
	sys/dev/pci/if_alereg.h: revisions 1.1-1.2
	sys/dev/pci/files.pci: revisions 1.310-1.313
	sys/dev/mii/atphy.c: revisions 1.1-1.5
	sys/dev/mii/files.mii: revision 1.42
	share/man/man4/age.4: revisions 1.1-1.3
	share/man/man4/ale.4: revisions 1.1-1.2
	share/man/man4/atphy.4: revisions 1.1-1.2
	share/man/man4/Makefile: revisions 1.486, 1.489
	distrib/sets/lists/man/mi: revisions 1.1118, 1.1132
	sys/arch/i386/conf/GENERIC: revisions 1.928, 1.933
	sys/arch/i386/conf/XEN2_DOM0: revisions 1.57, 1.60
	sys/arch/amd64/conf/GENERIC: revisions 1.239, 1.241
	sys/arch/amd64/conf/XEN3_DOM0: revisions 1.38, 1.42
Add the age(4) and ale(4) drivers for Attansic L1 and Atheros
AR8121/AR8113/AR8114 devices respectively.

Pull up following revision(s) (requested by jmcneill in ticket #261):
	distrib/sets/lists/man/mi: revision 1.1117
	share/man/man4/Makefile: revision 1.485
	share/man/man4/gcscaudio.4: revision 1.1
Add man page for gcscaudio driver.

Add man pages for recently imported SD/MMC drivers.

add manpage for ale(4) driver

Pullup the following revisions (requested by msaitoh in ticket #1284):
	distrib/sets/lists/base/mi		1.706-707,1.797
	distrib/sets/lists/man/mi		1.1006
	etc/mtree/NetBSD.dist			1.340
	share/man/man4/Makefile			1.432
	sys/arch/amd64/conf/GENERIC		1.149 via patch
	sys/arch/i386/conf/ALL			1.103
	sys/arch/i386/conf/GENERIC		1.832
	sys/arch/i386/conf/GENERIC_LAPTOP	1.237
	sys/arch/macppc/conf/GENERIC		1.257
	sys/arch/sparc64/conf/GENERIC		1.86
	sys/dev/usb/usbdevs			1.468,1.479-480 via patch
	sys/dev/usb/usbdevs.h			regen
	sys/dev/usb/usbdevs_data.h		regen
	sys/dev/microcode/Makefile		1.7
	sys/dev/usb/files.usb			patch
	share/man/man4/zyd.4			1.1 via patch
	sys/dev/microcode/zyd/Makefile		1.1-1.2
	sys/dev/microcode/zyd/build.c		1.1
	sys/dev/microcode/zyd/microcode.h	1.1
	sys/dev/microcode/zyd/zd1211-license	1.1
	sys/dev/microcode/zyd/zyd-zd1211	1.1
	sys/dev/microcode/zyd/zyd-zd1211b	1.1
	sys/dev/usb/if_zyd.c			patch
	sys/dev/usb/if_zydreg.h			1.1-1.2

Add ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g wireless network device support

Add altmem(4) man page.

Add bwi(4) man page based on Dragonfly man page

manpages for new age(4) and atphy(4) drivers.

Add man page for gcscaudio driver.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

Pull up following revision(s) (requested by tls in ticket #37):
	share/man/man4/Makefile: revision 1.483
add new nsp.4 manpage

add new nsp.4 manpage

Ported alipm(4) and admtemp(4) from OpenBSD.

Add thinkpad(4) man page.

jme(4), a driver for JMicron Technologies JME250 Gigabit Ethernet and
JME260 Fast Ethernet PCI Express controllers.
Written with a lot of cut-n-paste from the FreeBSD jme(4) driver.
No support for jumbo ethernet frames yet (but should come soon).
Thanks to JMicron Technologies for providing me sample boards and
documentation for this work.

Add u3g(4) driver from FreeBSD. This driver provides better support for
3G datacards than ugensa and will replace the latter for the supported
devices.

Since I nuked the old adt7467c driver, I might as well nuke the man page.

Sync with HEAD.

Remove reference to sdtemp.4 - committed in error

Add new driver for dbCool(tm) family of Thermal Monitor and Fan Controller.
Supported chips: ADM1027, ADM1030, ADT7463, ADT7466, ADT7467, ADT7468,
ADT7473, ADT7475, and ADT7476.  Notably missing is the ADT7490, and fan
controller support on the ADT7466 is still on the to-do list.

Tested by myself and njoly@
Reviewed by garbled@
Commit approved by christos@, bouyer@, cube@, and matt@

Remove esl(4)

Merge in changes between wrstuden-revivesa-base-2 and
wrstuden-revivesa-base-3.

Obsolete fssbs(4). The kernel thread is named fssN now.

Sync with wrstuden-revivesa-base-2.

uvideo(4) man page

Add man page for pseye(4)

Add video(4) and video(9) man pages.

Updates to enable the iwn man page

Add Greg Oster's man page for WAPBL.  Still a work in progress,
expect updates.

Thanks a lot to Greg for cribbing together the info and getting
this going.

Wrap long lines, break lines on start of new letter.

Sync w/ -current. 34 merge conflicts to follow.

sync with head

Sync with netbsd-4.

Sync with HEAD.

A manual page.

Import siisata(4) by Jonathan A. Kollasch.

     The siisata driver supports the Silicon Image SteelVine family of SATA-II
     controllers, interfacing the hardware with the ata(4) and atapi(4) sub-
     systems.

     The following controllers are supported by the siisata driver:

           Silicon Image SiI3124 4-port PCI/PCI-X
           Silicon Image SiI3132 2-port PCI-Express x1
           Silicon Image SiI3531 1-port PCI-Express x1

     SATA Native Command Queueing is not yet supported.
     Device hot swapping is not yet supported.
     Silicon Image's Software RAID is not yet supported by the
             ataraid(4) driver.

Approved by: core (christos), releng (bouyer)

acpidalb(4): Driver for PNP0C32 Hotkeys aka "Direct Application Launch Buttons".
"awesome" jmcneill

sync with head.

hpqlb(4): driver for HP Quick Launch buttons - found on HP Pavilion Notebooks

amdtemp(4): Driver for AMD CPU Temperature Sensors. Adopted from OpenBSD's kate(4).
Changes beyond OpenBSD's driver:
- Improved support for AMD K8
- Added support for AMD Barcelona, AMD Phenom and AMD Griffin
Tested on various single and multi-socket machines.
Review and OK xtreame

Pull up following revision(s) (requested by sborrill in ticket #1128):
	sys/dev/pci/if_lii.c: revisions 1.1, 1.3 via patch
	sys/arch/i386/conf/ALL: revision 1.161 via patch
	share/man/man4/lii.4: revision 1.1 via patch
	sys/dev/pci/files.pci: revision 1.303 via patch
	sys/dev/DEVNAMES: revision 1.238 via patch
	sys/arch/i386/conf/GENERIC: revision 1.885 via patch
	distrib/sets/lists/man/mi: revisions 1.1062, 1.1063 via patch
	sys/arch/i386/conf/XEN2_DOM0: revision 1.43 via patch
	share/man/man4/Makefile: revision 1.460 via patch
	sys/arch/i386/conf/INSTALL: revision 1.323 via patch
	sys/dev/pci/if_liireg.h: revision 1.1 via patch
Add a driver for the Atheros/Attansic L2 Fast-Ethernet chip found on a
series of hardware that includes Asus's famous EeePC.

Add man page for devfsctl(4).

Hi hubert!

file Makefile was added on branch mjf-devfs2 on 2008-04-04 10:52:56 +0000

Add the finsio(4) driver. This driver supports the Hardware Monitor
device in the Fintek LPC Super I/O chips, this includes the following
list:

- F71805F
- F71806F
- F71862FG
- F71872F
- F71882
- F71883F

This has been adapted from the fins(4) driver available in OpenBSD, which
only supported F71805F.

Tobias Nygren <tnn> and myself added support for the other chips; thanks go
to Tobias for testing the driver with a Fintek F71882 chip.

Certain misguided people have complained, NetBSD only runs rare or
"retro" computers, but NetBSD also runs a growing number of rare
and retro add-on cards.  With this patch, NetBSD supports the IDEC
Supervision/16, a black&white image capture board for the 16-bit
ISA bus.  Approximate date of manufacture: 1991.  Total instances
known to be in use throughout the world: one.

Coming soon; isvctl(8), the utility program for capturing 8-bit,
512x480 images at speeds of up to 6 frames per second.

Include lii(4).

Add some MLINKS for man pages (no new content).

lpa(4) (Man page was removed about 14 years ago. Now link to lpt.4
on acorn32, i386, and mvme68k.)

audioctl(4)

random(4)
urandom(4)

tuner(4)
vbi(4)

wsmuxctl(4)

As mentioned on netbsd-docs list. (Many, many more man pages to do.)

Install the stuirda.4 man page, which was created in June 2007.

sync with HEAD

imported Mobile IPv6 code developed by the SHISA project
(http://www.mobileip.jp/).

add full support device driver for Huawei E220 wireless modem

PR/37692 from Yojiro UO
---
uhmodem: device driver for huawei 3G wireless modem

* what it is?

A device driver for huawei 3G wireless modem, E220 and its valiations.

The devices are very simuler to ubsa device, but they need special care
to use as modem device.
This patch introduce "uhmodem (USB Huawei modem)" for the devices.
A uhmodem device has two com devices and one USB mass strage device.
The driver enable to use all of them.

* dmesg:
uhmodem0 at uhub0 port 1 configuration 1 interface 0
uhmodem0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
uhmodem0: mass storage only mode, reattach to enable modem
uhmodem0: at uhub0 port 1 (addr 2) disconnected
uhmodem0 detached
uhmodem0 at uhub0 port 1 configuration 1 interface 0
uhmodem0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
ucom0 at uhmodem0 portno 0: modem
ucom1 at uhmodem0 portno 1: monitor
umass0 at uhub0 port 1 configuration 1 interface 2
umass0: HUAWEI Technologies HUAWEI Mobile, rev 1.10/0.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
cd0 at scsibus0 target 0 lun 0: <HUAWEI, Mass Storage, 2.31> cdrom removable

Pull up following revision(s) (requested by christos in ticket #1037):
	sys/dev/pci/arcmsr.c: patch
	sys/dev/pci/arcmsrvar.h: patch
	sys/dev/pci/pcidevs: patch
	sys/dev/pci/files.pci: patch
	sys/arch/i386/conf/GENERIC: patch
	sys/arch/i386/conf/XEN2_DOM0: patch
	sys/arch/i386/conf/INSTALL_LARGE: patch
	sys/arch/amd64/conf/GENERIC: patch
	sys/arch/amd64/conf/INSTALL: patch
	share/man/man4/Makefile: patch
	share/man/man4/arcmsr.4: patch
	distrib/sets/lists/man/mi: patch

Add the Areca Technology Corporation SATA RAID controller driver, ported
from OpenBSD.

Remove support for NetBSD/pc532.

sync with HEAD

Remove systrace. Ok core@.

Move sony.4 from i386 to MD man page directory

Rename battery(4) to battery_pmu(4), because at least we know that is
only specific to pmu.

add a simple battery(4) man page

Rename the Areca RAID driver (known as arc(4) to arcmsr(4) to avoid
namespace conflict with NetBSD/arc.

Found by tsutsui@.

Areca Technology Corporation SATA RAID controller driver, ported
from OpenBSD.

arc0 at pci2 dev 14 function 0: interrupting at ioapic0 pin 18 (irq 5)
arc0: Areca ARC-1210 Host Adapter RAID controller
arc0: 4 ports, 256MB SDRAM, firmware <V1.43 2007-4-17>
scsibus0 at arc0: 16 targets, 8 luns per target
[...]
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <Areca, ARC-1210-VOL#00, R001> disk fixed
sd0: 465 GB, 56514 cyl, 36 head, 480 sec, 512 bytes/sect x 976562176 sectors
sd1 at scsibus0 target 0 lun 1: <Areca, ARC-1210-VOL#01, R001> disk fixed
sd1: 465 GB, 56514 cyl, 36 head, 480 sec, 512 bytes/sect x 976562176 sectors

bioctl(4) output with two RAID0 volumes:

Volume  Status               Size Device
 arc0 0 Online               466G ARC-1210-VOL#00 RAID0
      0 Online               234G 0:0.0   noencl <WDC WD2500YS-01SHB1 20.06C06>
      1 Online               234G 0:1.0   noencl <WDC WD2500YS-01SHB1 20.06C06>
 arc0 1 Online               466G ARC-1210-VOL#01 RAID0
      0 Online               234G 0:2.0   noencl <WDC WD2500YS-01SHB1 20.06C06>
      1 Online               234G 0:3.0   noencl <WDC WD2500YS-01SHB1 20.06C06>

The driver still needs changes related to locking and talking to the
firmware, which sometimes is unable to answer...

Raid card donated by Areca Technology Corporation via Trent George.
Disks used for testing were contributed by TNF.

Thank you very much.

A very terse manual for pud(4) (it leaves almost everything as
an exercise to the reader).

Rename it(4) to itesio(4) to accomodate for the following changes:

- The driver now uses the Super I/O address port as port argument in
  the configuration file. The Environmental Controller base address is
  fetched by the Super I/O EC LDN configuration registers.

- Invalidate voltage sensors if data returned is 0xff.

- Use the Super I/O Global Configuration Registers Chip ID[12] and Device
  Revision to store/print the correct information.

- Use only the Fan Extended Tachometer registers on IT871[68]F for now;
  this gives us correct data for IT8705/IT8712F again.

Inspired by the smsc(4) driver. The UPDATING file has been updated to
reflect the rename.

Add man page for pseudo-audio device driver.

sync with HEAD

Add coretemp(4). A new driver for Intel Core's on-die thermal sensor,
available on Intel Core or newer CPUs.

Ported from FreeBSD. Tested by rmind on i386 and joerg on amd64.

Enabled with "options INTEL_CORETEMP".

PR/37210: Jonathan Kollasch: Add seeprom man page.

Remove the man4.pmppc but move the contents over to man4.evbppc as they
still contain worthwhile information.

Pull up following revisions via patch (requested by bouyer in ticket #1838):
	distrib/sets/lists/man/mi: revision 1.997
	sbin/bioctl/strtonum.c: revision 1.1
	sys/dev/Makefile: revision 1.25
	sys/arch/amd64/conf/GENERIC: revision 1.139
	sbin/bioctl/strtonum.h: revision 1.1
	sys/dev/bio.c: revision 1.1
	sbin/bioctl/bioctl.c: revision 1.1
	share/man/man4/bio.4: revision 1.1
	sbin/bioctl/bioctl.8: revision 1.1
	sys/sys/envsys.h: revision 1.11
	sbin/bioctl/bioctl.8: revision 1.3
	sbin/bioctl/bioctl.8: revision 1.4
	sys/arch/i386/conf/XEN2_DOM0: revision 1.25
	distrib/sets/lists/base/mi: revision 1.704
	sys/conf/majors: revision 1.34
	share/man/man4/Makefile: revision 1.426
	etc/MAKEDEV.tmpl: revision 1.86
	sys/arch/i386/conf/GENERIC: revision 1.825
	distrib/sets/lists/comp/mi: revision 1.1022
	sys/conf/files: revision 1.839
	usr.sbin/envstat/envstat.c: revision 1.24
	sbin/Makefile: revision 1.105
	sys/dev/ic/mfi.c: revision 1.4
	sys/dev/biovar.h: revision 1.1
	sys/dev/ic/mfivar.h: revision 1.4
	sbin/bioctl/Makefile: revision 1.1
Fix typo.
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.
Fix Dd argument (use full month names).
Use more markup.
Comment out references to safte(4) and softraid(4), which don't exist in
NetBSD.
Remove trailing whitespace.
Use macros instead of characters for HTML output (replace ">", "<"
with \*[Gt], \*[Lt]).
Sort sections.
Create /dev/bio

Add bcsp(4).

Catch up on netbsd-4 as of a few days ago.

Pull up following revision(s) (requested by mlelstv in ticket #895):
	sys/dev/usb/uslsa.c: revision 1.1
	sys/dev/usb/uslsa.c: revision 1.2
	sys/dev/usb/uslsa.c: revision 1.3
	sys/dev/usb/usbdevs: revision 1.466 (via patch)
	share/man/man4/uslsa.4: revision 1.1
	share/man/man4/Makefile: revision 1.429
	sys/arch/i386/conf/GENERIC: revision 1.828
	distrib/sets/lists/man/mi: revision 1.1002
	sys/dev/usb/files.usb: revision 1.77
	sys/arch/i386/conf/ALL: revision 1.99

From PR kern/33496 - add uslsa(4), a CP210x USB-RS232 ucom driver.

Add piixpcib(4), based on the one provided by Stephan Meisinger in
PR 37021.

New aps(4) driver for IBM Thinkpad Active Protection System.
Exports some sensors through the envsys(4) framework available
in some Thinkpad laptops.

Ported by Pierre Pronchery from OpenBSD, via PR port-i386/36852.

Tweaks, LKM and misc improvements by me. Added into i386/GENERIC
commented out.

add manpage for uchcom(4).

Sync w/ NetBSD-4-RC_1

Pull up following revision(s) (requested by bouyer in ticket #678):
	distrib/sets/lists/man/mi: revision 1.1001
	doc/CHANGES: revision 1.853 via patch
	share/man/man4/Makefile: revision 1.428
	share/man/man4/jmide.4: revision 1.1
	sys/arch/amd64/conf/GENERIC: revision 1.143
	sys/arch/amd64/conf/INSTALL: revision 1.69
	sys/arch/i386/conf/GENERIC: revision 1.827
	sys/arch/i386/conf/INSTALL_LARGE: revision 1.2 via patch
	sys/arch/i386/conf/XEN2_DOM0: revision 1.26
	sys/conf/files: revision 1.844 via patch
	sys/dev/ic/ahcisata_core.c: revision 1.1 via patch
	sys/dev/ic/ahcisata_core.c: revision 1.3
	sys/dev/ic/ahcisatareg.h: revision 1.1
	sys/dev/ic/ahcisatavar.h: revision 1.1
	sys/dev/pci/ahcisata.c: delete
	sys/dev/pci/ahcisatareg.h: delete
	sys/dev/pci/ahcisata_pci.c: revision 1.1
	sys/dev/pci/files.pci: revision 1.287-1.288
	sys/dev/pci/jmide.c: revision 1.1-1.2
	sys/dev/pci/jmide_reg.h: revision 1.1
	sys/dev/pci/pcidevs: revision 1.878
Add JMicron Technology vendor ID, and their current PCIe SATA/PATA
controllers.

Split the ahcisata driver in pci front-end and bus-independant back-end.
add jmide(4), a driver for the JMicron Technology JMB36x PCIe to SATA II/PATA
controllers. These controllers can be found on add-on PCIe cards, or
on some motherboards to provide the PATA connectivity (e.g. some intel
ICH8-based motherboards).
Thanks to JMicron Technology for providing me documentation and
different sample boards for this work.

Move mapping of AHCI register so that jmide knows if it fails, and avoids
calling ahci_intr() (which would cause a panic).
Try to use the pciide function for SATA drives if attaching ahci fails (this
doesn't seems to work though, it may be BIOS dependant).
Thanks to Gary Duzan for testing multiple pacthes.

We're not ready to handle ATAPI yet so just claim there's no drive to the
upper layer. This should work around a NULL pointer dereference when
an ATAPI device is detected on a AHCI device.

Add a manpage for the ichlpcib(4) driver. This needs some wizd-ification.

Add support for AnyCom BlueCard.

Move spdmem.4 to the i2c section.

Add spdmem(4) driver. This decodes technical specifications stored in
the eeprom on common types of memory modules. The specifications are
displayed during boot and can later be queried in the hw.spdmemN sysctl
subtree. Stub driver written by Nicolas Joly and greatly improved upon by
Paul Goyette. From PR 36745, with additional improvements by Paul and me.

Add support for Intel ICH SMBus controller.

file Makefile was added on branch matt-mips64 on 2007-07-28 10:51:59 +0000

Add support for Intel ICH SMBus controller.

Add support for NVIDIA nForce 2/3/4 SMBus controller and SMBus driver.

sn(4) driver on mac68k has been switched to using MI SONIC driver,
so prepare MI sn(4) man page. Also improve some descriptions.

Add zyd(4).

Pull up following revision(s) (requested by jnemeth in ticket #691):
	share/man/man4/xirc.4: revision 1.1
	distrib/sets/lists/man/mi: revision 1.1004
	share/man/man4/com.4: revision 1.13
	share/man/man4/xi.4: revision 1.11
	share/man/man4/Makefile: revision 1.430
xi now attaches at xirc, not pcmcia
PR/36310 -- Joerg Niendorf
note new xirc manpage

Add smsc.4 (hi, brett!)

note new xirc manpage

Add uslsa.4, as per PR kern/33496

add jmide(4), a driver for the JMicron Technology JMB36x PCIe to SATA II/PATA
controllers. These controllers can be found on add-on PCIe cards, or
on some motherboards to provide the PATA connectivity (e.g. some intel
ICH8-based motherboards).

Thanks to JMicron Technology for providing me documentation and
different sample boards for this work.

add a couple man pages for the new ADB subsystem

Pull up following revision(s) (requested by bouyer in ticket #603):
	distrib/sets/lists/base/mi: revision 1.704
	distrib/sets/lists/comp/mi: revision 1.1022
	distrib/sets/lists/man/mi: revision 1.997
	doc/CHANGES: revision 1.839
	sbin/Makefile: patch
	sbin/bioctl/Makefile: revision 1.1
	sbin/bioctl/bioctl.8: revision 1.1
	sbin/bioctl/bioctl.c: revision 1.1
	sbin/bioctl/strtonum.c: revision 1.1
	sbin/bioctl/strtonum.h: revision 1.1
	share/man/man4/Makefile: revision 1.426
	share/man/man4/bio.4: revision 1.1
	sys/arch/amd64/conf/GENERIC: revision 1.139
	sys/arch/i386/conf/GENERIC: revision 1.825
	sys/arch/i386/conf/XEN2_DOM0: revision 1.25
	sys/conf/files: revision 1.839
	sys/conf/majors: patch
	sys/dev/Makefile: revision 1.25
	sys/dev/bio.c: patch
	sys/dev/biovar.h: patch
	sys/dev/ic/mfi.c: revision 1.4-1.5
	sys/dev/ic/mfivar.h: revision 1.4
	sys/sys/envsys.h: revision 1.11
	usr.sbin/envstat/envstat.c: revision 1.24
Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.

note bio(4), envsys(4) DRIVE, and mfi(4) support for both.

tred->sensor is a u_int.

Add bio(4) and associated bioctl(8) from OpenBSD, a driver control block
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.

add 'lost' manpages to build:

	acorn26/iobus(4)
	mac68k/zsc(4)
	pc532/intro(4)
	sparc/autoconf(4)
	sun3/autoconf(4)
	vax/mtc(4)
	vax/rl(4)
	iee(4)

Add chipsfb.4 and genfb.4

Add basic drm(4) man page, and link it to drivers.
Feel free to improve it!

aiboost(4) manpage.

Pull up following revision(s) (requested by garbled in ticket #482):
	share/man/man4/man4.prep/intro.4: revision 1.1
	usr.sbin/eeprom/eeprom.8: revision 1.12
	usr.sbin/eeprom/prephandlers.c: revision 1.1
	distrib/sets/lists/base/md.prep: revision 1.13
	distrib/sets/lists/comp/md.prep: revision 1.22
	sys/arch/prep/conf/majors.prep: revision 1.19
	share/man/man4/man4.prep/Makefile: revision 1.1
	share/man/man4/Makefile: revision 1.421
	usr.sbin/eeprom/defs.h: revision 1.10
	share/man/man4/man4.prep/nvram.4: revision 1.1
	sys/arch/prep/pnpbus/nvram_pnpbus.c: revision 1.6
	usr.sbin/eeprom/Makefile: revision 1.14
	etc/mtree/NetBSD.dist: revision 1.333
	usr.sbin/eeprom/main.c: revision 1.17
	etc/etc.prep/MAKEDEV.conf: revision 1.5
	distrib/sets/lists/man/mi: revision 1.978
	usr.sbin/eeprom/pathnames.h: revision 1.3
	sys/arch/prep/include/Makefile: revision 1.19
	sys/arch/prep/include/nvram.h: revision 1.3
Finish the code in the prep nvram driver that makes it an actual device
(/dev/nvram) and implement all the associated ioctls fully.  Tested with
a hacked up copy of eeprom(8).  Right now it can only be used to see the
nvram GEV contents, not actually edit them.  Will do that later some day.

Pull up following revision(s) (requested by tsutsui in ticket #1673):
	distrib/sets/lists/man/mi		1.844, 1.871
	share/man/man4/Makefile			1.372, 1.379 via patch
	share/man/man4/re.4			1.8, 1.9, 1.11, 1.12
	share/man/man4/rgephy.4			1.1
	share/man/man4/rlphy.4			1.1, 1.2
	sys/arch/amd64/conf/GENERIC		1.79, 1.89
	sys/arch/amd64/conf/INSTALL		1.45, 1.49
	sys/arch/i386/conf/GENERIC		1.717, 1.747
	sys/arch/i386/conf/GENERIC_LAPTOP	1.164
	sys/arch/i386/conf/INSTALL		1.277, 1.283
	sys/arch/i386/conf/INSTALL_LAPTOP	1.96, 1.98
	sys/arch/i386/conf/XEN2_DOM0		1.22 via patch
	sys/arch/macppc/conf/GENERIC		1.220, 1.246
	sys/arch/macppc/conf/INSTALL		1.96, 1.100
	sys/dev/cardbus/if_re_cardbus.c		1.10
	sys/dev/cardbus/if_rtk_cardbus.c 	1.29-1.31
	sys/dev/ic/rtl8169.c			1.14, 1.20, 1.24, 1.25, 1.28-1.61, 1.63, 1.64-1.81 via patch
	sys/dev/ic/rtl81x9.c			1.52, 1.54-1.63, 1.65, 1.67-1.70
	sys/dev/ic/rtl81x9reg.h			1.15-1.26
	sys/dev/ic/rtl81x9var.h			1.19, 1.21-1.37
	sys/dev/mii/files.mii			1.38
	sys/dev/mii/miidevs			1.62, 1.64
	sys/dev/mii/rgephy.c			1.10, 1.13-1.16
	sys/dev/mii/rlphy.c			1.1, 1.6, 1.7, 1.11 via patch
	sys/dev/pci/if_re_pci.c			1.13, 1.15-1.17, 1.19-1.23
	sys/dev/pci/if_rtk_pci.c		1.25, 1.28, 1.29, 1.31
	sys/dev/pci/pcidevs			1.851, 1.852

on re(4):
- improve stability (I believe ;-)
- add a workaround for hardware ip4csum-tx bug
- support newer chips (8169SB/SC, PCIe based 8168 etc.)
- fix 8139C+ support
- enable hardware VLAN
- misc bus_dma(9) fix (which makes re(4) work on mips ports)

on rtk(4):
- fix kern/31348
- fix possible panic on dreamcast

Add man4.prep subdir

Supprot Bluetooth HCI UART (H4) driver and daemon.

Updated viaenv(4) driver:

* Support for the VIA VT8231 Hardware monitor.
* Power Management Timer available for timecounters in both
  VT86C686A and VT8231 (code simplified thanks to dev/ic/acpipmtimer).
* Remove viapm(4) code and manpage (which was a link to viaenv.4 anyway).

From OpenBSD, tested by some users.

Pull up following revision(s) (requested by xtraeme in ticket #341):
	distrib/sets/lists/man/mi: revision 1.965
	share/man/man4/ug.4: revision 1.1
	sys/dev/isa/files.isa: revision 1.145
	sys/arch/amd64/conf/GENERIC: revision 1.124
	sys/dev/isa/ug.c: revision 1.1
	sys/dev/isa/ugvar.h: revision 1.1
	share/man/man4/envsys.4: revision 1.21
	share/man/man4/Makefile: revision 1.418
Driver for the Abit uGuru Hardware system monitor, contributed by
Mihai Chelaru. Minor changes (simplification and KNF) by me.
Thanks.
Add ug0 at isa? commented out (driver for the Abit uGuru
Hardware system monitor).
ug(4): manual page for the Abit uGuru hardware system monitor
(wiz please review, thanks).
+ ug(4)

Pull up following revision(s) (requested by bouyer in ticket #1621):
	sys/arch/i386/conf/GENERIC: revision 1.787 via patch
	share/man/man4/Makefile: revision 1.407 via patch
	distrib/sets/lists/man/mi: revision 1.936 via patch
	share/man/man4/ipmi.4: revision 1.1 via patch
	sys/arch/i386/i386/bios32.c: revision 1.11 via patch
	sys/dev/DEVNAMES: revision 1.221 via patch
	sys/arch/x86/x86/ipmi.c: revision 1.1 via patch
	sys/arch/i386/i386/mainbus.c: revision 1.65 via patch
	sys/arch/x86/include/smbiosvar.h: revision 1.1 via patch
	sys/arch/x86/include/ipmivar.h: revision 1.1 via patch
	sys/arch/x86/conf/files.x86: revision 1.20 via patch
	sys/arch/i386/conf/files.i386: revision 1.293 via patch
Add ipmi(4) driver, from OpenBSD. This requires SMBios support, so add
SMBios detection and mapping to bios32.c, also from OpenBSD (for now this
is only compiled in if ipmi(4) is configured). The sensors and watchdog are
accessible though envsys(4).
Works on i386; some work is needed on amd64 to access the BIOS. It would
eventually work on Xen if the SMBios is accessible (to be tested).
Add manpage for new ipmi driver.
Claim ipmi.

ug(4): manual page for the Abit uGuru hardware system monitor
(wiz please review, thanks).

Pull up following revision(s) (requested by bouyer in ticket #1609):
	sys/arch/i386/conf/INSTALL: revision 1.298
	sys/arch/i386/conf/GENERIC: revision 1.802
	sys/dev/pci/files.pci: revision 1.274
	sys/arch/amd64/conf/GENERIC: revision 1.122
	sys/dev/pci/mfi_pci.c: revision 1.1 via patch
	distrib/sets/lists/man/mi: revision 1.958
	sys/arch/amd64/conf/INSTALL: revision 1.61
	sys/dev/ic/mfireg.h: revision 1.1
	share/man/man4/Makefile: revision 1.416 via patch
	sys/dev/ic/mfi.c: revision 1.1
	sys/arch/i386/conf/XEN2_DOM0: revision 1.19
	sys/dev/ic/mfivar.h: revision 1.1
	sys/conf/files: revision 1.821
	share/man/man4/mfi.4: revision 1.1
	share/man/man4/mfi.4: revision 1.2
	sys/dev/pci/pcidevs via patch
Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller.
Ported from OpenBSD, tested on i386 and amd64.
Punctuation issues.

Pull up following revision(s) (requested by bouyer in ticket #1608):
	sys/arch/i386/conf/INSTALL: revision 1.299 via patch
	sys/arch/i386/conf/XEN2_DOM0: revision 1.20 via patch
	sys/arch/i386/conf/GENERIC: revision 1.803 via patch
	sys/dev/pci/files.pci: revision 1.275 via patch
	sys/arch/i386/conf/GENERIC_LAPTOP: revision 1.218 via patch
	sys/arch/amd64/conf/GENERIC: revision 1.123 via patch
	sys/dev/pci/if_bnx.c: revision 1.1 via patch
	share/man/man4/bnx.4: revision 1.1-1.2 via patch
	distrib/sets/lists/man/mi: revision 1.959 via patch
	sys/arch/amd64/conf/INSTALL: revision 1.62 via patch
	sys/dev/microcode/bnx/bnxfw.h: revision 1.1-1.2 via patch
	sys/dev/pci/if_bnxreg.h: revision 1.1 via patch
	share/man/man4/Makefile: revision 1.417 via patch
	sys/arch/i386/conf/INSTALL_LAPTOP: revision 1.112 via patch
Add bnx(4), a driver for Broadcom NetXtreme II 10/100/1000 Ethernet device.
Ported from OpenBSD by cube@, with some bus_dma fixes by me.
Tested on i386 and amd64.
Add a NetBSD RCS tag.
Nx -> Ox; remove trailing whitespace.

Pull up following revision(s) (requested by bouyer in ticket #287):
	sys/arch/i386/conf/INSTALL: revision 1.299
	sys/arch/i386/conf/XEN2_DOM0: revision 1.20
	sys/arch/i386/conf/GENERIC: revision 1.803
	sys/dev/pci/files.pci: revision 1.275
	sys/arch/i386/conf/GENERIC_LAPTOP: revision 1.218
	sys/arch/amd64/conf/GENERIC: revision 1.123
	sys/dev/pci/if_bnx.c: revision 1.1
	share/man/man4/bnx.4: revision 1.1
	distrib/sets/lists/man/mi: revision 1.959
	sys/arch/amd64/conf/INSTALL: revision 1.62
	sys/dev/microcode/bnx/bnxfw.h: revision 1.1
	sys/arch/i386/conf/ALL: revision 1.76
	sys/dev/pci/if_bnxreg.h: revision 1.1
	share/man/man4/Makefile: revision 1.417
	sys/arch/i386/conf/INSTALL_LAPTOP: revision 1.112
Add bnx(4), a driver for Broadcom NetXtreme II 10/100/1000 Ethernet device.
Ported from OpenBSD by cube@, with some bus_dma fixes by me.
Tested on i386 and amd64.

Pull up following revision(s) (requested by bouyer in ticket #286):
	sys/arch/i386/conf/INSTALL: revision 1.298
	sys/arch/i386/conf/GENERIC: revision 1.802
	sys/dev/pci/files.pci: revision 1.274
	sys/arch/amd64/conf/GENERIC: revision 1.122
	sys/dev/pci/mfi_pci.c: revision 1.1
	distrib/sets/lists/man/mi: revision 1.958
	sys/arch/amd64/conf/INSTALL: revision 1.61
	sys/arch/i386/conf/ALL: revision 1.75
	sys/dev/ic/mfireg.h: revision 1.1
	share/man/man4/Makefile: revision 1.416
	sys/dev/ic/mfi.c: revision 1.1
	sys/arch/i386/conf/XEN2_DOM0: revision 1.19
	sys/dev/ic/mfivar.h: revision 1.1
	sys/conf/files: revision 1.821
	share/man/man4/mfi.4: revision 1.1
Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller.
Ported from OpenBSD, tested on i386 and amd64.

Add bnx(4), a driver for Broadcom NetXtreme II 10/100/1000 Ethernet device.
Ported from OpenBSD by cube@, with some bus_dma fixes by me.
Tested on i386 and amd64.

Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller.
Ported from OpenBSD, tested on i386 and amd64.

Add ahcisata(4), a driver for AHCI 1.0 and 1.1 controllers. Tested on the sata
ports of a Intel 63xxESB chipset. Does not support NCQ yet.

New EtherIP driver based on tap(4) and gif(4) by Hans Rosenfeld.
Notable changes:
	* Fixes PR 34268.
	* Separates the code from gif(4) (which is more cleaner).
	* Allows the usage of STP (Spanning Tree Protocol).
	* Removed EtherIP implementation from gif(4)/tap(4).

Some input from Christos.

initial documentation for the puffs message interface

Add rum(4) for newer USB Ralink devices. Obtained from OpenBSD.
Special thanks to Sepherosa Ziehau for helping debugging USB issues.
Hook up rum(4) for i386 config files.

At wiz's suggestion, replace the two MD podulebus(4) pages with a single MI
one, modelled somewhat on pci(4).

ei(4) is MI, shared by acorn26 and acorn32.  Pull its man page up out of the
acorn26 directory.

Add support for the Intel 80003 Gigabit Ethernet controller (found e.g. in
newer server chipsets) to wm(4), from the FreeBSD em(4) driver.
While there, add a few other Intel Ethernet controller that should work as
is.
Properly update the RX error and TX collision counters.
Add ikphy(4), a driver for the Intel i82563 Kumeran 10/100/1000 Ethernet PHYs

Add man pages for SPI, m25p flash, and tm121temp devices.  I'm holding off
creating an spiflash man page until the framework settles, and I'd
ultimately like to create section 9 pages for SPI.

Add manpage for new ipmi driver.

Add a sec(4) manual page.

Pull up following revision(s) (requested by riz in ticket #153):
	share/man/man4/pci.4: revision 1.84
	share/man/man4/Makefile: revision 1.404
	distrib/sets/lists/man/mi: revision 1.929
	share/man/man4/sk.4: revision 1.10
	sys/dev/DEVNAMES: revision 1.216
Add msk(4) info to the sk(4) manpage, and install links (from OpenBSD).
Also, add msk to DEVNAMES.

Pull up following revision(s) (requested by plunky in ticket #161):
	sys/dev/bluetooth/btdev.h: revision 1.4
	distrib/sets/lists/comp/mi: revision 1.922
	usr.sbin/postinstall/postinstall: revision 1.25
	sys/netbt/hci_unit.c: revision 1.3
	sys/netbt/hci_ioctl.c: revision 1.4
	usr.sbin/sdpd/profile.c: revision 1.2
	usr.sbin/btdevctl/btdevctl.c: revision 1.2
	share/man/man4/Makefile: revision 1.405
	distrib/sets/lists/man/mi: revision 1.930
	distrib/sets/lists/etc/mi: revision 1.176
	usr.sbin/sdpd/profile.c: revision 1.3
	usr.sbin/btdevctl/btdevctl.c: revision 1.3
	etc/MAKEDEV.tmpl: revision 1.62
	distrib/sets/lists/base/mi: revision 1.650
	usr.sbin/btdevctl/btdevctl.h: revision 1.2
	usr.bin/sdpquery/sdpquery.1: revision 1.4
	sys/netbt/rfcomm_session.c: revision 1.2
	usr.sbin/btdevctl/btdevctl.8: revision 1.3
	usr.bin/sdpquery/search.c: revision 1.2
	usr.sbin/sdpd/Makefile: revision 1.2
	sys/dev/bluetooth/Makefile: revision 1.3
	usr.sbin/btdevctl/cfg.c: file removal
	sys/netbt/files.netbt: revision 1.4
	usr.sbin/btdevctl/sdp.c: revision 1.1
	sys/dev/bluetooth/bthidev.c: revision 1.3
	etc/bluetooth/Makefile: revision 1.3
	sys/dev/pcmcia/files.pcmcia: revision 1.51
	sys/dev/bluetooth/bthidev.c: revision 1.4
	sys/dev/bluetooth/bthidev.h: revision 1.3
	usr.sbin/btdevctl/dev.c: file removal
	sys/dev/bluetooth/files.bluetooth: revision 1.10
	sys/arch/i386/conf/GENERIC: revision 1.777
	share/man/man4/ubt.4: revision 1.6
	share/man/man4/bthub.4: revision 1.3
	sys/netbt/hci.h: revision 1.5
	sys/arch/i386/conf/GENERIC_LAPTOP: revision 1.202
	lib/libsdp/sdp.h: revision 1.2
	usr.sbin/btdevctl/print.c: revision 1.1
	share/man/man4/bthidev.4: revision 1.5
	share/man/man4/btdev.4: file removal
	usr.sbin/btdevctl/print.c: revision 1.2
	sys/arch/i386/conf/GENERIC_LAPTOP: revision 1.205
	usr.sbin/btdevctl/Makefile: revision 1.2
	sys/dev/usb/files.usb: revision 1.70
	sys/netbt/l2cap_signal.c: revision 1.2
	sys/netbt/hci_link.c: revision 1.4
	sys/dev/bluetooth/bthub.c: revision 1.3
	share/man/man4/btsco.4: revision 1.5
	sys/netbt/hci_link.c: revision 1.5
	share/man/man4/btdev.4: revision 1.4
	sys/dev/bluetooth/btkbd.c: revision 1.3
	sys/dev/bluetooth/btdev.c: file removal
	sys/netbt/hci_event.c: revision 1.2
	sys/dev/bluetooth/btsco.h: revision 1.2
	etc/mtree/special: revision 1.101
	sys/dev/bluetooth/btsco.c: revision 1.3
	sys/conf/majors: revision 1.27
	usr.sbin/sdpd/hf.c: revision 1.1
	sys/dev/bluetooth/btsco.c: revision 1.4
	share/man/man5/rc.conf.5: revision 1.107
	sys/dev/bluetooth/btdev.c: revision 1.2
	etc/rc.d/btdevctl: revision 1.2
	usr.sbin/btdevctl/db.c: revision 1.1
	etc/rc.d/btdevctl: revision 1.3
	etc/bluetooth/btdevctl.conf: revision 1.1
	usr.sbin/btdevctl/hid.c: file removal
	sys/arch/i386/conf/GENERIC: revision 1.781
	sys/dev/bluetooth/btdev.h: revision 1.3
Make btdev default count explicit
Fix typo in variable name
update to bluetooth device attachment:
remove pseudo-device btdev(4) and inherent limitations
add bthub(4) which autoconfigures at bluetooth controllers as they
are enabled. bluetooth devices now attach here.
btdevctl(8) and its cache is updated to handle new semantics
etc/rc.d/btdevctl is updated to configure devices from a list
in /etc/bluetooth/btdevctl.conf
also include service name in dictionary being sent to kernel.
(this is not used just yet, but it might be in the future and it will
be easier if we dont have to provide code to handle its absence)
clarify the CAVEAT section somewhat
Add service discovery support for the Handsfree profile
Replace static 'FreeBSD' string with operating system name gleaned
from uname(3)
Halt the callout on detach
btsco.c:
 - sco_getopt(..., SO_SCO_MTU, ...) expects the address of a uint16_t,
   not an int. So change sc_mtu's type to uint16_t.
 - Try a little harder to ensure btsco_round_blocksize() does not
   return zero. Prevents a subsequent panic in audio_init_ringbuffer().
	from scw@
Endian issues:
hci_event.c:
 - Convert memo->response.clock_offset to host-endian.
hci_ioctl.c:
 - printf format tweak (size_t)
hci_link.c:
 - Convert memo->response.clock_offset from host-endian.
 - Tweak a DIAGNOSTIC message.
l2cap_signal.c:
 - In l2cap_recv_config_req(), rp->scid is little-endian so make sure
   we convert from host-endian.
	from scw@
hci_link.c:
 - In hci_link_free(), do not unlink items from a LIST queue within
   a LIST_FOREACH() iterator.
rfcomm_session.c:
 - In rfcomm_session_recv_mcc_nsc(), do not unlink items from a LIST
   queue within a LIST_FOREACH() iterator.
	from scw@
guard against a possible situation where the list of l2cap channels is changed
when the bluetooth code is not expecting it to be. During a disconnect, we can
detach the channel that is being disconnected, but its not really safe to detach
any others.
Print explicit 64-bit types using the format macros from int_fmtio.h.
Unbreaks the build for our LP64 ports, where "long long" typically is
not 64 bits.

update to bluetooth device attachment:

remove pseudo-device btdev(4) and inherent limitations

add bthub(4) which autoconfigures at bluetooth controllers as they
are enabled. bluetooth devices now attach here.

btdevctl(8) and its cache is updated to handle new semantics

etc/rc.d/btdevctl is updated to configure devices from a list
in /etc/bluetooth/btdevctl.conf

Add msk(4) info to the sk(4) manpage, and install links (from OpenBSD).

Also, add msk to DEVNAMES.

Workbit NinjaATA-32 busmastering PIO IDE controller driver (njata)

This driver supports NinjaATA-32Bi and NPATA-32 chips,
which are used for CardBus ATA interface cards and
CardBus CompactFlash adapters.

Remove some ns(4)-related man pages.

Remove XNS protocol man page.

Pull up following revision(s) (requested by plunky in ticket #49):
	share/man/man4/Makefile: revision 1.400
	sys/dev/usb/FILES: revision 1.10
	sys/dev/usb/files.usb: revision 1.69
	share/man/man4/ubt.4: revision 1.2
	sys/dev/usb/ubt.c: revision 1.15
	share/man/man4/ubtbcmfw.4: file removal
	distrib/sets/lists/man/mi: revision 1.922
	sys/dev/DEVNAMES: revision 1.210
	sys/dev/usb/ubtbcmfw.c: file removal
The ubtbcmfw(4) driver fails to compile, as noted by PR kern/34219.
While it can be made to compile, the paradigm is not quite right because
it attempts to contact the filesystem during autoconfig which sometimes
causes a panic. Even if that was fixed, there is another potential problem
in that the driver tries/sleeps/tries/sleeps and the sleep could
theoretically sleep past the rc.d/btconfig stage and the controller
would remain unconfigured.
So, I have prepared a different method for loading the firmware to
Broadcom BCM2033 chip based devices. A package 'sysutils/bcmfw' will load
the firmware files via a ugen(4) device interface.
This update removes the ubtbcmfw(4) driver and adds a table to the ubt(4)
driver so that it will not attach to Broadcom BCM2033 based devices before
the firmware was loaded.
This fixes kern/34219

The ubtbcmfw(4) driver fails to compile, as noted by PR kern/34219.

While it can be made to compile, the paradigm is not quite right because
it attempts to contact the filesystem during autoconfig which sometimes
causes a panic. Even if that was fixed, there is another potential problem
in that the driver tries/sleeps/tries/sleeps and the sleep could
theoretically sleep past the rc.d/btconfig stage and the controller
would remain unconfigured.

So, I have prepared a different method for loading the firmware to
Broadcom BCM2033 chip based devices. A package 'sysutils/bcmfw' will load
the firmware files via a ugen(4) device interface.

This update removes the ubtbcmfw(4) driver and adds a table to the ubt(4)
driver so that it will not attach to Broadcom BCM2033 based devices before
the firmware was loaded.

This fixes kern/34219

Add dk(4) manpage written by Jonathan A. Kollasch, provided in PR 34193.

Add a port of the OpenBSD Intel 3945ABG wpi(4) wireless driver, by
Jean-Baptiste Campesato.

From PR kern/33778.

Apply patch (requested by bouyer in ticket #1441):
Pullup the twa(4) driver for the 3ware Apache RAID controllers.
Matching revisions in current:
share/man/man4/twa.4	1.1
sys/dev/pci/ld_twa.c	1.2
sys/dev/pci/twa.c	1.9
sys/dev/pci/twaio.h	1.3
sys/dev/pci/twareg.h	1.5
sys/dev/pci/twavar.h	1.5

Install twa(4) and add it to set list.

Bluetooth fixes by Iain Hibbert:
Remove bthset(4) device and add btsco(4) in its place. This is an
improved version which is not just for headsets, as it can receive
incoming connections (eg for Hands Free Profile). Update bthset(1)
control utlitiy to relate to new device.

Bluetooth fixes by Iain Hibbert:
Change the way in which bluetooth devices attach to system. The
new way is for devices to attach directly to a btdevN device via
its own control file /dev/btdevN.
- bthub(4) is replaced by btdev(4).
- /dev/bthubctl is replaced by /dev/btdevN.
- configuration now uses proplib(3) property lists.
- btcontrol(8) updated to use new API, and now uses private
- XML config file /var/db/btdev.xml.

Misc fixes for sl(4) and slattach(8) man pages:
- note that ifconfig(8) create subcommand is required before slattach(8)
- network addresses aren't defined by slattach(8) but ifconfig(8)
- Add a BUGS section in slattach(8) to note that currently there is no way to
  specify/see an interface name to be attached
- move description about link[0-2] flags from slattach(8) to sl(4)
  (rather than adding a new description...)
- move description about SLIP limitations to a new BUGS section in sl(4)
- remove inappropriate MLINKS of slip.8 to slattach.8
- create MLINKS of slip.4 to sl.4 instead
- add some more xrefs

Ok'ed by christos, and closes PR kern/33672 and PR bin/33923.

Add man page for ugensa

Enable kse(4).

Add man4.hpcarm. Pointed out by Hisashi T Fujinaka.

move geodecntr.4 into i386 section where it actually belongs

add description for geodecntr

Initial import of bluetooth stack on behalf of Iain Hibbert.  (plunky@,
NetBSD Foundation Membership still pending.)  This stack was written by
Iain under sponsorship from Itronix Inc.

The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.

Drivers for both PCMCIA and USB bluetooth controllers are included.

Integrate Common Address Redundancy Procotol (CARP) from OpenBSD

'pseudo-device	carp'

Thanks to: joerg@ christos@ riz@ and others who tested
Ok: core@

Add man page for lmtemp(4).

Driver for iTE IT87xxF and compatibles hardware monitor. Add
commented out entries on GENERIC and GENERIC_LAPTOP.

Adapted from OpenBSD.

Add preliminary documentation for DDC and EDID subsystem.

Man page for the Intel PIIX4 power management driver.

Pull up following revision(s) (requested by jonathan in ticket #1298):
	share/man/man4/pciide.4: revision 1.60
	share/man/man4/Makefile: revision 1.376 via patch
	sys/dev/pci/svwsata.c: revision 1.1
	sys/dev/pci/files.pci: revision 1.243
	sys/arch/i386/conf/INSTALL: revision 1.281
	sys/dev/pci/pcidevs: revision 1.771 via patch
	sys/dev/pci/pciidevar.h: revision 1.33
	sys/arch/i386/conf/XEN0: revision 1.34
	sys/arch/i386/conf/GENERIC: revision 1.732
	sys/dev/pci/pciide_svwsata_reg.h: revision 1.1
Add svwsata(4), a driver for Serverworks K2 SATA controllers. From
OpenBSD via Joerg Sonnenberger.

Pull up following revision(s) (requested by tron in ticket #1266):
	share/man/man4/Makefile: revision 1.377
	sys/dev/pci/if_nfe.c: revision 1.1
	sys/dev/pci/if_nfereg.h: revision 1.1
	share/man/man4/nfe.4: revision 1.1
	sys/dev/pci/if_nfevar.h: revision 1.1
	distrib/sets/lists/man/mi: revision 1.863
add nfe driver and manpage from OpenBSD.

Pull up following revision(s) (requested by he in ticket #10409):
	share/man/man4/Makefile: revision 1.378 via patch
Enable ciss(4) manpage.

Pull up following revision(s) (requested by he in ticket #1247):
	share/man/man4/Makefile: revision 1.378
	distrib/sets/lists/man/mi: revision 1.870 via patch
Enable ciss(4) manpage.

Dallas Semiconductor 1-Wire bus support, from OpenBSD.  Currently includes
gpioow(4), attaching a bit-banging driver via a GPIO pin.  Also,
owtemp(4) which supports some of the 1-Wire temperature sensors, including
the DS18b20 and DS1920 - temperatures are returned via the envsys(4)
framework.

Original drivers by Alexander Yurchenko (grange@openbsd), with envsys(4)
support and a fix to the 1-wire search algorithm (for discovering
devices on the bus) by me.

As discussed on tech-kern earlier this week.

Add a kernel driver and userland program for the Topfield TF5000PVR range
of digital video recorders popular in Europe and Australia.

These devices have a USB client port which can be used to upload and
download recordings (and other files, such as MIPS binaries for execution
on the DVR's CPU) to/from their internal hard disk, in addition to some
other operations on files and directories.

Since the swcrypto pseudo-device is now needed for using the crypto
framework without a hardware accelerator card, make sure it has
some accessible documentation.

Add basic rgephy(4) manpage, from OpenBSD.

Enable ciss(4) manpage.

add nfe driver and manpage from OpenBSD.

Add svwsata(4), a driver for Serverworks K2 SATA controllers. From
OpenBSD via Joerg Sonnenberger.

remove vinum

Added evbmips section, including intro and aupci man pages.

The tb(4) driver is gone, so should be the manual page.

Add rlphy(4) (Realtek 8139/8201L PHY) from OpenBSD.

Pullup (via patch) requested in ticket #5754 by itohy

  Provide a backport for ukyopon(4) and pullup umodem(4) updates.

Add man page for gpio framework (from OpenBSD)

Added rs5c372rtc, shpcic man pages.

Pull up following revision(s) (requested by ragge in ticket #768):
	share/man/man4/xge.4: revision 1.1
	share/man/man4/Makefile: revision 1.368
Add man page for the xge driver.

Add adt7467c.4.

Add man page for the xge driver.

Pull up revision 1.366 (requested by nakayama in ticket #638):
Add man page for teliosio(4).

Add ucycom.4

Add man page for teliosio(4).

Pull up revision 1.354 (requested by itohy in ticket #1430):
ukyopon(4): Kyocera AIR-EDGE PHONE driver
Close NetBSD PR #25954 in a different way.

Pull up revision 1.364 via patch (requested by rpaulo in ticket #601):
Add rtw.4

Add uipaq(4).  From OpenBSD.

Add rtw.4

add a manpage for the ral (at pci/cardbus/uhub) wlan driver,
mostly from OpenBSD

ieee1394 import from FreeBSD.

Pull up revision 1.358 via patch (requested by briggs in ticket #520):
Add an initial man page for ataraid(4).

Pull up revision 1.359 via patch (requested by kent in ticket #494):
add azalia(4) man page

remove pss(4) driver.  It has never been workable and has not been
compilable for a long time.

Add ac97(4) man page from OpenBSD, written by Constantine Sapuntzakis.
Suggested by kent@.

add azalia(4) man page

Add an initial man page for ataraid(4).

Install vinum(4) manpage.

Pull up revision 1.356 (requested by elad in ticket #389):
Remove outdated verifiedexec(4) man page, add veriexec(4) to makefile

Remove outdated verifiedexec(4) man page, add veriexec(4) to makefile

Add IEEE 802.11 manual pages from FreeBSD to both the Makefiles
and the set lists.

Pull up revision 1.354 (requested by itohy in ticket #160):
ukyopon(4): Kyocera AIR-EDGE PHONE driver
Close NetBSD PR #25954 in a different way.

ukyopon(4): Kyocera AIR-EDGE PHONE driver

Close NetBSD PR #25954 in a different way.

Backout changes for tickets 1057 to 1059. They shouldn't have gone
into this branch.

Pull up revision 1.342 via patch (requested by he in ticket #1059):
Add manual page for the ahd driver.  Taken from FreeBSD and adapted
to the NetBSD port of the driver.
OK'ed by fvdl.

Pull up revision 1.342 via patch (requested by he in ticket #1059):
Add manual page for the ahd driver.  Taken from FreeBSD and adapted
to the NetBSD port of the driver.
OK'ed by fvdl.

add tra(4) manpage

Pull up revision 1.336 (via patch, requested by bouyer in ticket #1019):
  Add pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx)
  series of controllers.

Add a manpage for attimer(4), and cross-reference it from pcppi(4).

add agr(4), a pseudo network device driver for link aggregation.

add vge(4) manpage, obtained from FreeBSD

add ciphy(4) manpage

Add atu(4) manpage: 802.11b USB wifi dongle.  From OpenBSD.

Add sem.4 from FreeBSD.

Add documentation for the new auixp(4) driver.

Add iwi.4

Add a software watchdog timer facility.  Because this slightly
changes the "tickle" model of wdogctl(8), it was modified as well;
while I was in there, I cleaned up the argument parsing.

The code was reviewed by simonb@.

Add and install a manual page for tap(4).

Add manual page for the ahd driver.  Taken from FreeBSD and adapted
to the NetBSD port of the driver.

OK'ed by fvdl.

revert previous change while discussion is in progress

RFC cannot be used as manpage regarding to the ISOC copyright boilerplate.
remove it until someone writes it up from scratch/freely-redistributable
text is found.

Add a manual page for ixpide(4).

add iteide(4) driver for ITE8212-based IDE controllers. from
OpenBSD, ported to NetBSD by me.

ok'd by bouyer@, thorpej@.

Remove netsmb(4); nsmb(4) replaces it (and is linked to it for now).
Sort MLINKS lines in Makefile.

pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

merge after importing pf from openbsd 3.6. (userland part)

some files were imported to the different places from the previous version.
v3_5:
	etc/pf.conf
	etc/pf.os
	etc/spamd.conf
	share/man/man4/pf.4
	share/man/man4/pflog.4
	share/man/man5/pf.conf.5
	share/man/man5/pf.os.5
	share/man/man5/spamd.conf.5
v3_6:
	dist/pf/etc/pf.conf
	dist/pf/etc/pf.os
	dist/pf/etc/spamd.conf
	dist/pf/share/man/man4/pf.4
	dist/pf/share/man/man4/pflog.4
	dist/pf/share/man/man5/pf.conf.5
	dist/pf/share/man/man5/pf.os.5
	dist/pf/share/man/man5/spamd.conf.5

Pull up revision 1.329 (via patch, requested by itohy in ticket #1741):
  Add support for the Workbit NinjaSCSI-32 PCI/Cardbus
  SCSI driver, njs(4).

s/uax/axe/

Add the cdce(4) man page.  This also gives the correct history of the
driver.  It's only based on Bill Pauls work, the CDC part is by
Daniel Hartmeier.

Add auacer.

Install sti(4) and descend into man4.hp700.

Documentation on the PIM kernel options and on multicast, from Pavlin
Radoslavov, imported from FreeBSD.

Pull up revision 1.329 (requested by itohy in ticket #800):
Add njs.4

Add njs.4

Move ipw(4) from usr.sbin/ipwctl to share/man/man4.

install spif(4).

Add ptm(4). Christos thinks it's minimal but ok :)

Pull up revision 1.325 (requested by bouyer in ticket #644):
Add geodeide(4), a driver for the AMD Geode CS5530A IDE controller.
Tested by Ian Zagorskih (ianzag at megasignal.com).

Add geodeide(4), a driver for the AMD Geode CS5530A IDE controller.
Tested by Ian Zagorskih (ianzag at megasignal.com).

Pull up revision 1.323 (via patch, requested by toshii in ticket #555):
  Add re(4) manual page.

add pf manpage for installation

Add re(4) manpage, from FreeBSD.

basic uep(4) manpage.

kill -HUP `cat /var/run/wizd.pid`

Do not install ppi(4) -- drochner says that there's no driver for it.
(hp300/ppi.4 is something different and has its own man page.)

Pullup rev 1.317-1.318 (requested by jonathan in ticket #237)

Add manpages for crypto(4),and for the hifn(4) and ubsec(4) hardware crypto accelerators.

Build and install atppc(4), plip(4), ppbus(4), ppi(4) manual pages.

Move spic.4 from man4 to man4.i386.

Pullup rev 1.316 (requested by jonathan in ticket #236)

Add a lightly-modified copy of Sam Leffler's FreeBSD manpage for fast_ipsec,
along with an explicit caveat about the unsupported, unsafe state of
combining both IPv6 and fast_ipsec.

Make  new hifn(4) and ubsec(4) manual pages visible to system, after
review, proofing, and bug-fixing by Thomas Klausner (wiz):
1. add hifn(40 and ubsec(4) to share/man/man4/Makefile and the distrib set lists.
2. Restore commented-out cross-references to hifn(40 and ubsec(4) in crypto(4).

No change made to hifn.4 or ubsec.4; commit forced for cross-reference
and for pullup-request purposes.

Commit first draft of a manpage for crypto(4), the user-mode API
to opencrypto(9).

Add fast_ipsec.4 to Makefile. Thanks to Klaus Klein for the reminder.

Add kloader(4).

install man pages for be(4) qe(4) qec(4) xbox(4) ie(4) pnozz(4) tctrl(4)
xd(4) and xy(4)

Add shb(4).

Manpage for the dge card.

re-format the main list of man pages -- it was getting ugly.

add ath.4

Update the file system snapshot driver:
- Document the kernel thread.
- Rename some functions and variables.
- Return EROFS where appropriate.
- Use shifts instead of 64-bit divide.
- Use a simple_lock to make it MP-safe.
- Add M_CANFAIL to malloc to avoid panic on large cluster size.
- Allow sparse file for backing store and use VOP_BALLOC() to allocate
  space. Default size of backing store is the size of the file system.

Remove accidental extra stuff.

Make usbtask(4) be usb(4).

Split the Artisea bits out of piixide(4) into artsata(4).

Split the SATALink bits out of the cmdide(4) manpage into the satalink(4)
manpage.

The file system snapshot pseudo driver.

Uses a hook in spec_strategy() to save data written from a mounted
file system to its block device and a hook in dounmount().

Not enabled by default in any kernel config.

Approved by: Frank van der Linden <fvdl@netbsd.org>

Descend into man4.hpcsh.
Install adc(4) and j6x0tp(4) manual pages.

Added stpcide(4) driver for STMicroelectronics STPC IDE controllers.

Descend into man4.sparc64 and install man pages there.

Add man page for per-chip pciide drivers.